Brakes
Japan
Published 25 Feb 2011
Ref JP-1127120
Isuzu: Parking brake cable/rod
Translated from Japanese · machine translation
- Country
- Japan
- Published
- 25 Feb 2011
- Units affected
- 104
- Reference
- JP-1127120
Affected vehicles
Isuzu Forward 2005–2007
Hazard
On vehicles equipped with truck-mounted cranes, the gap between the transmission crossmember and the crane-mounting bolts—through which the parking brake cable is routed—may be insufficient on some vehicles. As a result, the parking brake cable may contact the crossmember or mounting bolts, and continued use in this condition can damage the cable's outer sheath, obstruct the movement of the inner wire, and prevent the parking brake from engaging.
Show original (日本語)
積載形トラッククレーン搭載車において、駐車ブレーキケーブルの配索経路であるトランスミッションクロスメンバとクレーンの架装ボルトの隙間が少ないものがある。そのため、当該駐車ブレーキケーブルがクロスメンバや架装ボルトと接触し、そのままの状態で使用を続けると、当該駐車ブレーキケーブルの外装が損傷し芯線の動きを妨げ、駐車ブレーキが作動しなくなるおそれがある。
Remedy
Inspect the parking brake cable on all vehicles. (1) If the gap is insufficient, add a stopper to the mounting bolt. (2) If the gap is extremely insufficient, relocate the mounting bolt rearward to create adequate clearance. If the mounting bolt cannot be relocated rearward, alter the routing of the parking brake cable. (3) If the parking brake cable shows contact marks, replace it with a new cable.
Show original (日本語)
全車両、当該駐車ブレーキケーブルを点検し、 ①当該隙間が少ない場合は、架装ボルトのストッパを追加する。 ②当該隙間が極めて少ない場合は、架装ボルトを後方移設し隙間を確保する。なお、架装ボルトを後方に移設できない場合は、当該駐車ブレーキケーブルの配索を変更する。 ③当該駐車ブレーキケーブルに接触痕のある場合は、当該駐車ブレーキケーブルを新品に交換する。