Brakes
Japan
Published 14 Oct 2004
Ref JP-1112730
Komatsu Mec: Other (Suspension/Buffer Device)
Translated from Japanese · machine translation
- Country
- Japan
- Published
- 14 Oct 2004
- Units affected
- 512
- Reference
- JP-1112730
Affected vehicles
小松メック LW100-1 1993–1998
小松メック LW80-1 1993–1998
Hazard
The bracket securing the suspension lock cylinder, which locks the buffer device during operation, has insufficient strength. As a result, cracks may develop in the vehicle frame at the bracket mounting points during operation and braking. Continued use could lead to the bracket detaching from the vehicle frame in the worst case, resulting in tire damage.
Show original (日本語)
作業時の緩衝装置の機能を固定するサスペンションロックシリンダを取付けているブラ ケットの強度が不足しているため、作業時及び制動時に当該ブラケットを取付けている車 枠に亀裂が生じるものがある。そのため、そのまま使用を続けると、最悪の場合、車枠か ら当該ブラケットが外れ、タイヤを損傷するおそれがある。
Remedy
Install and weld reinforcing plates to the suspension lock cylinder mounting brackets on all vehicles. Additionally, inspect for the presence of anti-nose-dive valves designed to prevent forward tilt during braking; remove any that are installed and replace the nipple with a corrective-action part.
Show original (日本語)
全車両、サスペンションロックシリンダ取付用ブラケットに補強板を追加して溶接する。 また、制動時の前傾を防止するためのアンチノーズダイブバルブの有無を点検し、装着さ れているものは取外すとともに、ニップルを対策品と交換する。