Wheel / axle
Japan
Published 24 Mar 2004
Ref JP-1110560
Mitsubishi: Other (Running Gear)
Translated from Japanese · machine translation
- Country
- Japan
- Published
- 24 Mar 2004
- Units affected
- 221282
- Reference
- JP-1110560
Affected vehicles
Mitsubishi Fuso 1983–2003
Hazard
Front hub strength is insufficient. Cracks may develop near the base of the hub flange when subjected to repeated high-frequency cornering. Additional factors such as maintenance condition and load capacity can accelerate crack initiation. Continued use in this condition allows cracks to propagate, and in the worst case, fracture of the affected area may result in wheel detachment.
Show original (日本語)
フロントハブの強度が不足しているため、旋回頻度の高い走行を繰り返した場合などに、 ハブのフランジ部の付け根付近に亀裂が発生するものがある。また、整備状況、積載条件 などの要因が重なると、この亀裂の発生が早まる可能性がある。このため、そのままの状 態で使用を続けると亀裂が進行し、最悪の場合、当該部分が破断して車輪が脱落するおそ れがある。
Remedy
Verify the type of hub installed on all vehicles and replace with a remedial hub as necessary. Due to time required for remedial hub verification and supply, the following interim measures shall be implemented: ① For vehicles capable of mounting the current latest-model hub, confirm that the current latest-model hub is installed, and replace with the current latest-model hub if not. ② For vehicles unable to mount the current latest-model hub, inspect for hub cracks, and replace with a new hub of appropriate specification if cracks are present.
Show original (日本語)
全車両、装着されているハブの種類を確認し、必要に応じてハブを対策品と交換する。 なお、対策品の検証と供給に時間を要するため、暫定措置として次の対策を行う。 ①現行の最新型ハブが装着可能な車両については、現行の最新型ハブに交換されているこ とを確認し、未交換のものは現行の最新型ハブと交換する。 ②現行の最新型ハブの装着が不可能な車両については、ハブの亀裂の有無を点検し、亀裂 のあるものは対応する新品のハブと交換する。