Steering
Japan
Published 28 Nov 2025
Ref JP-1157410
Hitachi: Steering system
Translated from Japanese · machine translation
- Country
- Japan
- Published
- 28 Nov 2025
- Units affected
- 59
- Reference
- JP-1157410
Affected vehicles
日立 ZX125W-7 2023–2025
Hazard
In the steering valve controlling shovel loader rotation, improper manufacturing processes have resulted in some units where the spring inside the shock valve pressure adjustment screw is not installed in its correct position. Consequently, when external forces during operation return the spring to its proper position, internal pressure cannot be maintained. In the worst case, when steering operations are performed left or right, hydraulic pressure may not be generated, resulting in inability to steer.
Show original (日本語)
ショベル・ローダの旋回を制御するステアリングバルブにおいて、製造工程が不適切なため、油圧を調整するショックバルブ調圧用ネジの内部にあるバネが、正規位置に組付けられていないものがある。そのため、稼働時の外力によりバネが正規位置に戻ると、内部の圧力を保持できず、最悪の場合、左右旋回操作をした際に油圧が発生せず、旋回不能になるおそれがある。
Remedy
Inspect the depth from the end face of the shock valve pressure adjustment screw on the steering valve for all vehicles. Replace non-conforming units with good parts.
Show original (日本語)
全車両、ステアリングバルブのショックバルブ調圧用ネジの端面からの深さを点検し、不適合品については良品に交換する。